Soldering tester (UNI-TESTER)

Soldering tester for both robotic and manual soldering

Soldering tester (UNI-TESTER)

In addition to the tip temperature, Uni-Tester can measure the tip leakage voltage and ground resistance simultaneously. (also available for hand soldering) Compatible with the latest international standards such as the new IEC-61191-1 (Ed3 / 2018) and IPC J-STD-001G.

  • The tester that can measure tip temperature, the tip leakage voltage and ground resistance.
  • Separate system (controller and sensor unit) considering installation onto a robot.
  • The tester can deliver and share records to external devices with serial communication.
  • The records can be utilized in various applications such as automatic tip temperature offset.
  • The measuring range of ground resistance is 0-999kΩ, compatible with IEC-61191-1 (Ed3 / 2018).
  • The measuring range of the tip leakage voltage corresponds to IEC-61191-1 (Ed3 / 2018), IPC J-STD-001G, JIS-C61191-1.
  • ”PEAK HOLD ” function that holds the highest value and “AUTO ZERO ” function that resets leakage voltage and ground resistance.

Measurement range of UNI-TESTER for various standards

IPC IEC JIS
Standard IPC J-STD-001G
Issued in 2017
IEC-C61191-1(Ed3/2018)
Issued in 2018
JIS-C61191-1
(Planned to change after 2019)
Tip leakage voltage Not specified 2mV (RMS) or less 2mV (RMS) or less
Transient voltage 2V peak or less 2V peak or less 2V peak or less
Tip to ground resistance 5Ω or less 5Ω or less For overcurrent protection,
1MΩ or more
5Ω or less

Measurement range of UNI-TESTER. Supports three typical international and Japan standards.